Enhance WB provides a clear, hard wearing water repellent coating that will enhance and protect the appearance of low and medium porosity masonry surfaces. The hard film is resistive to water damage, disfigurement by airborne pollutants and its water repellent properties are supplemented by a highly effective biocide to inhibit the growth of fungi, algae and lichens. Enhance WB is both trafficable and highly resistant to UV light. The use of Enhance WB under other waterborne finishes will improve their performance and durability. Enhance WB can be applied over cured decorative coatings.
Enhance Gloss is a tough gloss finish surface treatment that provides a classic 'wet look' finish by restoring & enhances natural colours. The product has been modified to promote extremely low dirt pick up, making treated areas easier to maintain and keep clean. Worn or damaged areas can be recoated without stripping or grinding.
Enhance Satin is a tough satin finish surface treatment that provides protection, restores & enhances natural colours. The product has been modified to promote extremely low dirt pick up, making treated areas easier to maintain and keep clean. Worn or damaged areas can be recoated without stripping or grinding and most stains are easily removed by detergents.
Enhance Colours is a 2L tinting system designed to compliment Crommelin Enhance Satin and Gloss by providing a colour alternative to rejuvenating aged concrete and masonry. When used in conjunction with Crommelin Enhance Satin or Gloss, Enhance Colours is an ideal alternative to paving paints.
Colours Available are:
- Warm Sand
- Burnt Clay
- Light Grey
- Mid Grey
- Dark Charcoal
Enhance Penetrating is a highly water repellent treatment that penetrates deep into surfaces to cure and impede the passage of moisture. Enhance Penetrating reacts with soluble salts in cementitious surfaces to block capillaries whilst still allowing the substrate to release retained moisture, i.e. breathe.
Cromshield Solvent is an aromatic hydrocarbon used as a general purpose solvent/dilutant for solvent based acrylic resin solutions and as a clean up solvent for these and other based systems.
Silane Treatment Si is a complex blend of Silane/Siloxane technologies which results in a sealer that penetrates deep into masonry surfaces, and impedes the passage of moisture providing long-term protection to substrates against water penetration. Silane Treatment Si reacts with soluble salts in cementitious surfaces to block capillaries whilst still allowing the substrate to release retained moisture (breathe).
Stain Repel is a unique waterborne surface treatment with great resistance to chemicals and staining agents, outstanding water repellency and binding properties. It is both a penetrating and a film forming sealer - this provides protection whilst allowing the various substrates to 'breathe' normally. It also contains an antimicrobial additive inhibiting mould and algal growth.