Polycure


Polycure - Timber Coatings

Durapol® 1013 Super Satin

DURAPOL 1013 Super Satin is a single pack, clear subdued gloss, moisture curing polyurethane. It is a
highly abrasion resistant and extremely durable coating that can be used as a final coat to achieve a subtle
sheen on timber, parquetry and cork flooring.
Product Advantages

  • Highly abrasion resistant
  • Extremely durable
  • Attractive subtle sheen to be used as a final coat only
  • Excellent flow and levelling results in smooth finish
  • Enhanced the natural colour of the timber
Durapol® 1014 Low Sheen

Durapol® 1014 Low Sheen is a single pack, clear subdued gloss, moisture curing polyurethane. It is a
highly abrasion resistant and extremely durable coating that can be used as a final coat to achieve a subtle
sheen on timber, parquetry and cork flooring.

Product Advantages

  • Highly abrasion resistant
  • Extremely durable
  • Attractive subtle sheen to be used as a final coat only
  • Excellent flow and levelling results in smooth finish
  • Enhanced the natural colour of the timber
Titan Fast Sealer

TITAN Fast Sealer
TITAN Fast Sealer is an economical, single pack, fast drying sealer designed to be used as a first coat over
raw timber and cork flooring.

Product Advantages

  • Fast drying
  • Easy sanding

Coverage:
Timber, Parquetry Floors – 12-15 m² per litre
Cork & Particleboard – coverage will be reduced.
Coverage is dependent upon the porosity of the substrate.


Titan MC Gloss

TITAN MC Gloss is an economical single pack, clear, gloss (45%), moisture-curing polyurethane for use on interior timber, parquetry and cork flooring. It provides an abrasion resistant and a durable, gloss finish. Designed for interior use only and mostly commonly applied over Titan Fast Sealer. Washes in thinners and is available in 20ltr can.

Durapol® Sure Flow 5980

SUREFLOW Additive 3350 is a ready to use, specially designed, flow additive. When added to Polycure moisture cured range of coatings, in the recommended ratio, this additive will minimise the rejection problems normally caused by wax, oils and other common household contaminants. SUREFLOW Additive 3350 is suitable for use in Polycure single pack moisture curing (DURAPOL®), two pack polyurethanes (POLYTHANE®) and non yellowing (CRYSTAPOL®) finishes.

Durapol® Accelerator 5995

Polycure catalyst - is a ready to use accelerator for Polycure single pack and two pack polyurethanes. Available in 1ltr can.

PAINT (including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base) or PAINT RELATED
MATERIAL (including paint thinning or reducing compound)

Durapol® 5840 Gloss

DURAPOL® 5840 Gloss is an economical, single pack, clear, gloss moisture curing polyurethane for use on interior timber, parquetry and cork flooring.

DURAPOL 5840 can be applied in a three coat system to achieve a highly abrasion resistant and durable gloss finish.

DURAPOL 5840 Gloss can be applied under DURAPOL 1045 Super Gloss or DURAPOL 1050 Max as a first coat to achieve a high build, high gloss finish whilst reducing the overall cost.

Durapol® 1045 Gloss

DURAPOL® Gloss coatings are single pack, moisture curing polyurethane coatings for interior timber, parquetry and cork flooring.

They will provide a highly resistant and extremely durable protective film, which will result in a high gloss finish, when used in a three coat system.

Durapol® 1012 Semi Gloss

DURAPOL® subdued gloss coatings are single pack, moisture curing polyurethane coatings for interior timber, parquetry and cork flooring.

The coatings are highly abrasion resistant and extremely durable.

They provide floors with a subtle sheen when used as the final coat in a system with one of the following Polycure coatings: FASTASEAL® 3030, POLYTHANE® 2043-A/B, DURAPOL® 1044 Gloss or DURAPOL® 1045 Super Gloss.

The choice of Semi Gloss, Super Satin and Low Sheen provides an alternative to traditional gloss finished timber flooring. The coating is easy to maintain and will enhance the natural appearance of interior timber floors.

Polythane® 2043 2-pack

POLYTHANE® 2043 is a two pack, clear gloss polyurethane finish for interior timber and parquetry flooring.

It provides a highly abrasion resistant and extremely durable, protective film which will result in a mirror finish when used in a three coat system.

Fastaseal® 3030 Clear Seal

FASTASEAL® 3030 is a clear single pack, fast drying sealer which is easily sanded and has excellent adhesion to all timber species.

Formulated to be applied as a THIN FIRST COAT under all Polycure coatings, FASTASEAL®3030 provides an excellent block to resin exudation problems in oily timbers such as Brushbox, Tallowwood & Spotted Gum.

It is an efficient isolator to wax extraction problems experienced with particle board and minimises the darkening of timber usually associated with solvent based coatings.

Super Cleaning Solvent 3300

Super Cleaning Solvent 3300 is a blend of solvents formulated for cleaning tools used in the application of polyurethane.

It is suitable for cleaning DURAPOL® Moisture Cure, POLYTHANE® Two Pack Polyurethanes & CRYSTAPOL® Non Yellowing coatings.

Thinners 3310

Thinners 3310 has been formulated for use with Polycure's polyurethane coatings i.e. DURAPOL® Moisture Cure, POLYTHANE® Two Pack Polyurethanes & CRYSTAPOL® Non Yellowing coatings.

It is used primarily to enhance the flow characteristics of the polyurethane but can be used under conditions that may be considered abnormal for standard applications (see Data Sheet for further information). It may also be used for cleaning equipment.

Wet Edge Extender 3320

Wet Edge Extender 3320 is a blend of volatile solvents formulated to enhance the flow characteristics of Polycure polyurethane coatings.

It is used when very high/low temperature and/or humidity and/or dry windy atmospheric conditions are present.

Wet Edge Extender 3320 is also used where a large floor area is to be coated requiring maximum wet edge time.

DURAPOL 1050 Max Gloss

DURAPOL 1050 Max Gloss is a premium, single pack, clear, high build, moisture curing polyurethane with
exceptional gloss.
Product Advantages

  • Highly abrasion resistant
  • Extremely durable
  • Superior mirror finish
  • High solids / high build
  • Excellent flow and levelling results in smooth finish
  • Enhances the natural colour of the timber

High Grip Additive 3920 - 1L

Polycure 3920 High Grip is a slip resistant additive formulated for use in Polycure’s range of solvent based
coatings
Product Advantages
Achieves an R10 or greater slip resistant rating (Oil-Wet Ramp Slip Resistance Testing) as required by the
regulations introduced by the Building Code of Australia.
New slip resistance requirements became effective for stairs in May 2014 for some states.