Wood Fillers


Timbermate Wood Filler

Timbermate Woodfiller is an Interior grade 4 in 1 Woodputty, Grainfiller, Edgefiller and Crackfiller.
When thinned slightly with water can also be used as a sanding sealer.
Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram.
The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents.

Haymes Interior Wood Putty

An Interior/ Exterior, rapid drying water-based wood filler for nail holes, cracks and surface blemishes.

Agnew's Water Putty

Agnew's Water Putty is an excellent filler for patching and levelling wood, plasterboard, cement sheet, concrete, etc.

Particularly suitable if you need a hardwearing surface.
Agnew's Water Putty sets hard, adheres permanently and fills to any depth without shrinking or cracking.

It can be sawn, drilled and sanded.

Bona Mix & Fill

Mix & Fill is a non-toxic waterborne timber floor filler that guarantees a good colour match every time.

Combined with sanding dust from the floor Mix & Fill is perfect for filling parquetry floors or gaps between floor boards of up to 2mm and dries in as little as 20 minutes.

Excess filler is easy to remove.

Fuller Joint & Gap Sealant

Caulk in Colours is the premium acrylic caulking compound designed for expansion joints, gaps and decorative sealing up to 15mm, in both interior and exterior uses.

West System 105 Epoxy Resin

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing specific proportions of liquid epoxy resin and hardener.

This highly moisture-resistant plastic adheres to a wide range of materials, making it ideal for projects that require water and chemical resistence, and strong physical properties for structural bonding.

Select from a range of hardeners and additives that allow you to tailor the mixture's handling characteristics and the physical properties of the cured epoxy to suite your working conditions and specific coating or bonding application.

West System 205 Fast Harder

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing specific proportions of liquid epoxy resin and hardener.

This highly moisture-resistant plastic adheres to a wide range of materials, making it ideal for projects that require water and chemical resistence, and strong physical properties for structural bonding.

Select from a range of hardeners and additives that allow you to tailor the mixture's handling characteristics and the physical properties of the cured epoxy to suite your working conditions and specific coating or bonding application.

West System 206 Slow Hardener

206 Slow Hardener & 105 Resin Must be mixed at a 5:1 ration.

West System 411 Adhesive Filler

WEST SYSTEM 411 is a thickening additive mixed with West System Epoxy to create a filleting, filling and coving material with good strength and excellent gap filling qualities. Also available in larger packs of 4 litres, 12 litres and 20 litres.

West System 403 Microfibre Blend Gap Filler

A mix of cotton microfibre and colloidal silica used as a thickening additive for West System resin and hardener when used as an adhesive.

West System 502 Tinting Paste

WEST SYSTEM® 502 Black Colour Pigment is an epoxy-based paste used to tint the epoxy mixture and provide an even colour base or highlight surface flaws and imperfections, prior to the final finish system.

As a guide, a 125ml container of pigment will be suitable for 2.9 litres of mixed epoxy.

Note that pigmented epoxy will degrade under sunlight and is not intended as an exterior finish. An enamel or polyurethane paint system will need to be applied to provide UV protection.

West System 301 & 303 Mini Pumps

301 Mini Pumps are calibrated to deliver the correct working ratio of 5 parts of 105 resin to 1 part of either 205 Fast or 206 Slow hardeners. 303 Special Ratio Mini Pumps are calibrated to deliver the working ratio of 3 parts of 105 resin to 1 part of either 207 Special Coating or 209 Super Slow hardeners, with one full pump stroke of resin for each one full pump stroke of hardener.

West System 207 Hardener Epoxy Clear Coating

Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired.

Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.

West System Techniglue H60F

Solvent free, epoxy resin, specifically formulated for use with Techniglue-CA hardeners to cure at room temperature.
- The thixotropic nature of the adhesive provides good gap filling and hold-up, on verticle surfaces.